arco-automotive-lift-default-title-arco-ac-2pl1-4e-2-post-lift-with-floor-plate-4-ton-39577753518385

ARCO AC-2PL-4E 2-Post Lift with Floor Plate 4 Ton

  • DURABLE MATERIAL: Heavy-gauge steel column construction with corrosion-resistant finish for reliable long-term workshop performance.
  • ULTRA STABLE: Wide-base floor plate design distributes load evenly, providing solid footing even on standard workshop floors.
  • CAPACITY: 4,000 kg rated lifting capacity with a maximum lifting height of 1,800 mm for undercarriage access.
  • ASSEMBLED: Delivered with all hardware. Professional installation on a concrete floor slab is required. See all specs
Inquire Now

The ARCO AC-2PL-4E is a hydraulic two-post car lift with a floor plate base, rated to 4,000 kg. Designed for automotive workshops, garages, and service centres, this lift provides reliable and safe vehicle elevation for routine maintenance, tyre changes, exhaust work, and undercarriage inspection.

The manual release system gives the operator direct control over the descent, and the 2.2 kW single-phase motor keeps power consumption practical for standard workshop electrical installations. Rise time is 55 seconds with a 26-second drop time.

  • 4,000 kg rated load capacity for most passenger vehicles
  • 1,800 mm maximum lifting height for undercarriage access
  • Manual release descent for operator-controlled lowering
  • 2.2 kW / single-phase power unit for standard workshop supply

The floor plate base of the AC-2PL-4E is particularly suited to workshop floors where overhead anchor points or clear-floor installation is not practical. The floor plate distributes the structural load over a wider area, reducing point loading on the slab below.

A 3,426 mm machine width provides a generous working clearance around the vehicle, and the 2,824 mm overall height fits within the ceiling clearances of most standard workshop buildings. The 55-second rise time allows efficient throughput in a busy service environment.

  • Floor plate base suitable for standard concrete slab floors
  • 3,426 mm machine width for generous vehicle clearance
  • 2,824 mm machine height fits most workshop ceiling clearances
  • 55-second rise time supports efficient workshop throughput

The AC-2PL-4E is delivered with all structural components, the hydraulic power unit, and the lifting arms. Professional installation is required and must be carried out on an appropriate concrete floor slab of sufficient thickness and strength.

  • 2 x steel columns with floor plate base assemblies
  • Hydraulic power unit — 2.2 kW / 1 Ph / 220V
  • 2 x 2-stage and 2 x 3-stage lifting arm set
  • 4 x rubber pad adapters for vehicle contact points

Specification

Lifting Capacity

Max. Lifting Height

Machine Height

Machine Width

Rise Time

Drop Time

Feature

Power of motor

4000 kg

1800 mm

2824 mm

3426 mm

55s

26s

Manual release

2.2kW / 3Ph / 380V

Lift with Confidence.
Always.

The AC-2PL-4E delivers dependable 4-ton lifting performance for everyday workshop vehicle servicing with straightforward operator control.

03
Manual Release: Operator-controlled descent for precise, safe lowering under workshop conditions.
04
Single Phase Power 2.2 kW / 220V motor compatible with most standard workshop electrical installations.
01
Floor Plate Base: Distributes structural load across the slab without the need for recessed floor anchoring systems.
02
4-Ton Capacity: Rated for passenger cars, SUVs, and light commercial vehicles up to 4,000 kg.

OUR GALLERY

Car Service Lifts
Car-Service-Lifts-2
Car-Service-Lifts-1

FREQUENTLY ASKED QUESTION

What type of floor does the AC-2PL-4E require?

The AC-2PL-4E must be installed on a reinforced concrete floor slab of adequate thickness and compressive strength. The floor plate base distributes the structural load over a wider area than point-anchor designs, but installation must still be carried out on a properly cured, reinforced concrete surface. Consult a structural engineer if in doubt about floor suitability.

The AC-2PL-4E uses a manual release system for the descent. The operator engages the release mechanism to begin controlled lowering, providing direct control over the speed and stopping point of the descent. This manual approach is simple and does not depend on electrical power for the lowering function.

The AC-2PL-4E is rated for a maximum lifting capacity of 4,000 kg. This covers most standard passenger cars, SUVs, and light commercial vehicles. Always verify the kerb weight of the vehicle before lifting and ensure that the weight is evenly distributed across all four arm contact points.

The hydraulic power unit operates on a single-phase 220V supply with a 2.2 kW motor. This is compatible with the standard single-phase electrical supply available in most automotive workshops and service centres.